Installing Xenix on Qemu 0.14.0 part two.

Ok, we left off from part one, having prepared the hard disk. Now we are going to boot off the hard disk like this:

qemu.exe -L pc-bios -m 16 -hda xenix.disk -fda b1

 

xenix2 1 (1)Now if we go ahead and try to install normally it’ll fail like this:

xenix2 2 (1)

 

Which isn’t good at all.

xenix2 3 (2)

Instead, what we are going to do is hit the delete key breaking us to an install shell.

xenix2 4

So at the shell, we are going to fix the install/rinstall devices to force them to the 3 1/2″ high density diskette like this:

cd /dev
ln -f fd0135ds18 install
ln -f rfd0135ds18 rinstall
cd /
. /.profile

xenix2 5

Now we can proceed with the install, and since diskette B1 is already in the drive, we just hit enter. Once the B diskette is copied, the install script will prompt for a root password.

xenix2 6

Now it’s time to pick a timezone, and yes, I’m in North America.

xenix2 7

In EST.

xenix2 8

And sadly, yes we do DST. (*NOTE being this old, you can bet the offsets are all wrong for DST, I’m sure there is some deal to update the files, but I’m not sure of it off hand. But it’d be nice to update the timezone stuff for 4.2BSD as well).

xenix2 9

Let’s continue with the install.

xenix2 10

And let’s finish the operating system install.

xenix2 11

Now we’ll need the X1 diskette…

So far we’ve not needed to swap diskettes live under Qemu, but I thought I’d remind people that it’s a simple matter of hitting ctrl+alt+2 to bring up the Qemu console, then typing in:

change floppy0 x1

To verify you’ve even done this correctly, you can issue a “info block” command, and you should now see the floppy0 device referencing the x1 file.

Once you are done, you can switch back by hitting ctrl+alt+1

We are going to install one or more…

All of them as a matter of fact.

I’m going to fast forward a little here, and process all the X diskettes… there isn’t much to see here, it’ll prompt for a diskette, mount it in the qemu console, and switch back and proceed.

Yes this is a root only install, KISS (Keep it simple stupid) as they say.

Now it’ll prompt for the backup user password, then start to compress man pages. Needless to say on a fast computer this takes mere seconds… Not so back in the day on a 386!

Now it’ll prompt for the sysadm password, generate the termcap, then it’s time to swap series to the N series diskettes..

Now onward to N2.

Time to license & activate the system. Again.

Ok we are done.

And there we go, Xenix is installed!

A quick reboot, and we are ready to go!

So looking back, we’ve just done the impossible, we’ve installed Xenix on Qemu.

This entry was posted in qemu, xenix by neozeed. Bookmark the permalink.
avatar

About neozeed

What is there to tell? I've loved UNIX like things since I was first exposed to QNX in highschool (we had the Unisys ICONS!), and spent the better time of my teenage years trying to get my own UNIX... I should have bought Coherent in retrospect.. Anyways latched onto Linux in 1992, and then got some old BSD admin books and have been hooked on the VAX BSD & other big/ancient things since...!

4 thoughts on “Installing Xenix on Qemu 0.14.0 part two.

Leave a Reply

Your email address will not be published.

Notify me of followup comments via e-mail. You can also subscribe without commenting.