Adding virtual disks to User Mode Linux

Running out of disk space

Well my good ‘friend’ with their inappropriately provisioned Linux VPS  that runs UML (User Mode Linux) inside of it, ran into an issue where he needed to add a second virtual disk device.

Creating the disk file is no big issue, adding a whopping 1GB is pretty simple!

Using the ‘dd’ command it is trivial to make a 1GB file like this:

dd if=/dev/zero of=node1_swap.ubda bs=1M count=1024

And then just append it to the script that they are using to run the UML:

/virtual/kernel ubda=/virtual/node1.ubda mem=384M eth0=slirp,,/virtual/sl1.sh

to this:

/virtual/kernel ubda=/virtual/node1.ubda ubdb=/virtual/node1_swap.ubda mem=384M eth0=slirp,,/virtual/sl1.sh

Of course the real fun comes from trying to find the devices.  Having to dig around I found that the device major is 98 for the UBD’s and that they incrament by 16, so that the first 3 devices are as follows:

mknod /dev/ubda b 98 0
mknod /dev/ubdb b 98 16
mknod /dev/ubdc b 98 32

Adding to that, you can partition them, and then they break out like this:

mknod /dev/ubda1 b 98 1
mknod /dev/ubda2 b 98 2
mknod /dev/ubda3 b 98 3
mknod /dev/ubdb1 b 98 17
mknod /dev/ubdb2 b 98 18

You get the idea.

With the disk added you can partition the ubd like a normal disk

node1:~# fdisk /dev/ubdb

Command (m for help): p

Disk /dev/ubdb: 1073 MB, 1073741824 bytes
128 heads, 32 sectors/track, 512 cylinders
Units = cylinders of 4096 * 512 = 2097152 bytes

Device Boot Start End Blocks Id System
/dev/ubdb1 1 245 501744 83 Linux
/dev/ubdb2 246 512 546816 82 Linux swap / Solaris

etc etc.  And yes, you can then format, mount and all that.

First let’s setup the swap:

mkswap /dev/ubdb2
swapon /dev/ubdb2

Now let’s format the additional /tmp partition

node1:~# mke2fs /dev/ubdb1
mke2fs 1.40-WIP (14-Nov-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
125488 inodes, 501744 blocks
25087 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
62 block groups
8192 blocks per group, 8192 fragments per group
2024 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 24 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.

Now adding the following to the /etc/fstab so it’ll automatically mount the /tmp directory and add the swap:

/dev/ubdb1 /tmp ext2 defaults 0 0
/dev/ubdb2 none swap defaults 0 0

Now he’s got a dedicated swap partition, and a separate /tmp filesystem.

This entry was posted in disk images, Linux, User Mode Linux by neozeed. Bookmark the permalink.
avatar

About neozeed

What is there to tell? I've loved UNIX like things since I was first exposed to QNX in highschool (we had the Unisys ICONS!), and spent the better time of my teenage years trying to get my own UNIX... I should have bought Coherent in retrospect.. Anyways latched onto Linux in 1992, and then got some old BSD admin books and have been hooked on the VAX BSD & other big/ancient things since...!

Leave a Reply

Your email address will not be published.

Notify me of followup comments via e-mail. You can also subscribe without commenting.